Vinyl Flooring has become an extremely popular flooring option for many homeowners nowadays, especially kitchen vinyl flooring and bathroom vinyl flooring. Vinyl flooring is made out of synthetic materials such as fiberglass, PVC vinyl, and a plasticizer. It’s especially durable because it’s made from multiple layers and a thick core to keep you comfortable when you’re walking. Read on to know how you can install vinyl flooring in your home.

Step 1:

The foremost step is to choose the type of vinyl you want to install in your home.

Step 2: Prepare a sketch of the Room :

• Measure the room’s dimension accurately and make a sketch of the room where you plan to install the vinyl flooring.

• When going to purchase vinyl, bring this sketch with you to figure out the amount needed.

• Make sure to add few extra inches to allow material for trimming, cutting or centering the pattern in your room.

Step 3: Make the Subfloor Smooth and Flat :

• Make sure that your subfloor is in good condition. It must be completely flat and smooth.

• If you have a concrete subfloor, make sure to fill any holes or low-lying areas with the help of a patching compound.

• Make a thick mixture of water and patching compound, now spread it using a small trowel.

• Let it dry for about an hour. While the patching compound is drying, remove any shoe moulding present in the room and make the floor completely clean.

Step 4: Cut the Vinyl Flooring :

• Layout your Vinyl flooring in the room where you want to install it and make sure to mark the area where the excess vinyl will be cut out.

• Use a utility knife or heavy-duty shears for cutting.

• Save any excess vinyl flooring for other small rooms.

Step 5: Lay the Vinyl Flooring:

• Lay down the vinyl in the final position with ample excess around each of the walls.

• Around the obstructions, make relief cuts.

• Around an inside corner, make small half-circle cuts until the vinyl lies flat to the floor.

• Make straight relief cuts for outside corners.

Step 6: Roll Out Craft Paper :

• The next step is to roll back the vinyl next to the wall so as to expose the subfloor.

• Roll out some of the rolls of the craft paper along the length of the wall to create a partial template along the wall.

Step 7: Apply double-stick Tape :

• Line the craft paper using its edge against the wall, now tape down the craft paper to the floor with the help of masking tape approx. every 2 feet.

• Take a strip of double-stick tape and apply it every 2 feel to the craft paper.

• Now remove the backing from the top side of the tape.

Step 8: Roll back the Vinyl:

• In this step, just roll out the vinyl into position over a template and firmly press down so that vinyl adheres to the template.

• Now lift up the vinyl tenderly to see whether the template has stuck to the vinyl backing or not.

• Next, the vinyl should be cut at the outer edge of the paper.

Step 9: Cut the Vinyl :

• Carefully cut the vinyl along the template edge with the help of a straightedge and a protective piece of scrap wood to lie underneath the vinyl.

• Repeat steps 7-9 for each wall in the room.

• Make sure that the vinyl is in its final position and trimmed exactly to each of the walls.

Step 10: Spread Adhesive Material :

• Using a finely notched trowel spread the adhesive material along the wall about six inches wide.

Step 11: Attach Vinyl Flooring to the Adhesive :

• Lay back down the vinyl flooring into its position.

• Using a hand roller or block of wood wrapped up in a clean cloth, make sure to seat down the flooring to the adhesive.

Step 12:

• Now replace the shoe molding and trim along the walls of your room.

• When the adhesive has dried, move back the furniture.

• Finally, clean the vinyl flooring using a damp mob or no-rinse cleaner.

We recommend many other flooring options as well like rugs, artificial grass, and carpets.